Solutions faq, info, ceramic projects

Wella
flooring of the store

download Florim Solutions app

What has to be evaluated when designing raised floors?, Which are the features of the supporting structure of a raised floor?, Which material is used for filling the open joint?, Which is the suitable adhesive to guarantee safety and duration of the curtain walls?, Which is the laying methods of the adhesive for curtain walls?, Which features must the expansion joints of a glued outdoor ceramic tiling have?, Solutions faq, info, ceramic projects

A A A


	Utility



	Solutions Faq \| Glossary \| Cleaning and maintenance \| Data Manager \| Disclaimerv \| Human Resource

Articles: 9

- Page 1 of 2

1 2 »


	What has to be evaluated when designing raised floors? Remember that designing raised floors requires an attentive pre-emptive evaluation of certain aspects regarding:


	Which are the features of the supporting structure of a raised floor? The supporting structure of a raised floor is made of supports and crossbeams completely realised in galvanised steel, for heights that can vary from 3 cm to over 1 metre.


	Which material is used for filling the open joint? To give minimum but fundamental elasticity to the surface, the slabs must be laid and glued with open joint, choosing the width according to the shape of the slabs. The filling material must be chosen favouring the elasticity features as much as possible, to be obtained with the use of special flexible latex to be added to stucco with medium-large grains.


	Which is the suitable adhesive to guarantee safety and duration of the curtain walls? The adhesive is particularly important because it must work as mediator in the different expansion tensions of the ceramic tiling and of the substrate.


	Which is the laying methods of the adhesive for curtain walls? Florim Solutions recommends the "double spreading" technique, consisting in the laying of a glue layer on the support and on the back of the ceramic tiles to be glued.


	Which features must the expansion joints of a glued outdoor ceramic tiling have? To guarantee duration and resistance in time of the glued walls, the movements of the structure and the different dimensional variations due to the thermal changes, must be absorbed by the expansion joints, which must interest the thickness of the tiling and of the plaster.

Articles: 9

- Page 1 of 2

1 2 »

| Glossary »

Copyright © 2010-2012 Florim Solutions
Fiorano Modenese (Mo) - Italy

Internet partner: Sigla.com
[www.sigla.com]